If you’re in the construction or plumbing industry, you know that hanging pipes securely is crucial for a successful installation. One of the most reliable methods for supporting pipes is using all round steel strapping, also known as banding. This versatile material is strong, durable, and easy to work with, making it a go-to choice for many professionals. In this article, we’ll guide you through the process of installing all round steel strapping to hang pipes, ensuring a safe and efficient installation.

24 Gauge Galvanized Straps

Understanding All Round Steel Strapping

Before we dive into the installation process, let’s take a moment to understand what all round steel strapping is. It’s a continuous loop of high-strength steel that can be tightened and secured around objects, such as pipes. Steel strapping comes in various thicknesses and widths, allowing you to choose the appropriate size for your project. Additionally, it’s available in different finishes, including galvanized or stainless steel, to resist corrosion and provide a longer lifespan.

Advantages of Using All Round Steel Strapping

  • Strength: Steel strapping is incredibly strong and can support heavy loads, making it suitable for a wide range of pipe sizes and weights.
  • Durability: Unlike other materials, steel strapping is resistant to environmental factors, such as moisture, temperature changes, and UV radiation.
  • Versatility: All round steel strapping can be used in various applications, including hanging pipes, bundling, and securing loads.
  • Cost-effective: While the initial cost of steel strapping may be higher than alternatives, its longevity and reliability make it a cost-effective solution in the long run.

Preparing for Installation

Before you begin installing the steel strapping, it’s essential to gather the necessary tools and materials. Here’s what you’ll need:

  • All round steel strapping (choose the appropriate size and thickness for your project)
  • Steel strapping tensioner and sealer tool
  • Measuring tape
  • Marker or pencil
  • Safety gloves and glasses

Measuring and Marking

Start by measuring the circumference of the pipe and the distance between the mounting points where you’ll be securing the strapping. Mark these measurements on the pipe using a marker or pencil. This will ensure accurate placement and prevent any unnecessary adjustments later on.

Installing the Steel Strapping

Step 1: Cut the Strapping

Using the measurements you took earlier, cut the steel strapping to the desired length. Make sure to leave a little extra length to allow for overlap when securing the strapping.

Step 2: Position the Strapping

Place the steel strapping around the pipe at the marked location. Ensure that the strapping is level and centered on the pipe.

Step 3: Tighten and Seal

Insert the loose end of the strapping into the tensioner tool and begin tightening it around the pipe. As you tighten, maintain even pressure to ensure a secure fit. Once you’ve achieved the desired tension, use the sealer tool to crimp the strapping securely in place.

Pro Tip: When tightening the strapping, be careful not to over-tighten, as this can cause the pipe to deform or damage the strapping itself.

Step 4: Repeat as Needed

Repeat the process for any additional strapping locations along the pipe run. Ensure that the strapping is evenly spaced and properly secured at each mounting point.

Best Practices and Safety Considerations

While installing all round steel strapping may seem straightforward, there are a few best practices and safety considerations to keep in mind:

  • Always wear appropriate personal protective equipment (PPE), such as safety gloves and glasses, to avoid injuries.
  • Follow the manufacturer’s instructions for the tensioner and sealer tools to ensure proper use and avoid damaging the strapping.
  • When working at heights or in tight spaces, follow all safety protocols and use the appropriate fall protection equipment.
  • Ensure that the strapping is properly secured and cannot come loose, as this could pose a safety risk.

Conclusion

Installing all round steel strapping is an effective and reliable way to hang pipes securely. By following the steps outlined in this article and adhering to best practices and safety considerations, you can ensure a successful installation that will withstand the test of time. Remember, proper preparation, accurate measurements, and careful installation are key to achieving a professional and safe result. With the right tools and techniques, you’ll be able to confidently tackle any pipe hanging project using steel strapping.

GET QUOTE NOW

You may also find these topics interesting

Justin Wong

Justin Wong

Hi, I’m Justin, the technical engineer of Jiangmen Masters. We’ve been running a factory in China that makes metal hanger strap for 16 years now, and the purpose of this article is to share the knowledge related to metal hanger strap from a Chinese supplier’s perspective.